E-Store Search


Education Calendar

 

STEPS

 

Online Learning

 

Webinars

 

Specifier Seminars

 

CDP Driver Cert.

 

Register Now

 


 

Industry Links

Update Profile

Link to Us

 

 

 

How Is It Made? | How Is It Produced? | Delivery of Ready Mixed Concrete
  Inspection and Testing of Ready Mixed Concrete | Types of Concrete
Concrete In Practice Series

 

What is it?

Learn how the natural ingredients of concrete combine to form a remarkably strong, durable and economical building material that has been benefiting mankind for millennia.

Concrete Basics

In its simplest form, concrete is a mixture of paste and aggregates (sand & rock). The paste, composed of cement and water, coats the surface of the fine (sand) and coarse aggregates (rocks) and binds them together into a rock-like mass known as concrete.

Within this process lies the key to a remarkable trait of concrete: itís plastic and can be molded or formed into any shape when newly mixed, strong and durable when hardened. These qualities explain why one material, concrete, can build skyscrapers, bridges, sidewalks, and superhighways, houses and dams.

The key to achieving a strong, durable concrete rests on the careful proportioning and mixing of the ingredients. A concrete mixture that does not have enough paste to fill all the voids between the aggregates will be difficult to place and will produce rough, honeycombed surfaces and porous concrete. A mixture with an excess of cement paste will be easy to place and will produce a smooth surface; however, the resulting concrete will be more likely to crack and be uneconomical.

A properly proportioned concrete mixture will possess the desired workability for the fresh concrete and the required durability and strength for the hardened concrete. Typically, a mixture is by volume about 10 to 15 percent cement, 60 to 75 percent aggregates and 15 to 20 percent water. Entrained air bubbles in many concrete mixtures may also take up another 5 to 8 percent.

Portland cementís chemistry comes to life in the presence of water. Cement and water form a paste that surrounds and binds each particle of sand and stone. Through a chemical reaction of cement and water called hydration, the paste hardens and gains strength.

The character of concrete is determined by the quality of the paste. The strength of the paste, in turn, depends on the ratio of water to cement. The water-cement ratio is the weight of the mixing water divided by the weight of the cement. High-quality concrete is produced by lowering the water-cement ratio as much as possible without sacrificing the workability of fresh concrete. Generally, using less water produces a higher quality concrete provided the concrete is properly placed, consolidated and cured.

Besides portland cement, concrete may contain other cementitious materials including fly ash, a waste byproduct from coal burning electric power plants; ground slag, a byproduct of iron and steel manufacturing; and silica fume, a waste byproduct from the manufacture of silicon or ferro-silicon metal. Some of these cementitious materials are similar to the volcanic ashes the Romans mixed with lime to obtain their cement binder. Some of these structures still exist today! The concrete industry uses these materials, which would normally have to be disposed in land-fill sites, to the advantage of concrete. The materials participate in the hydration reaction and significantly improve the strength, permeability and durability of concrete.

 

Other Ingredients

Aggregates for concrete are chosen carefully. Aggregates comprise 60 to 75 percent of the total volume of concrete. The type and size of the aggregate mixture depends on the thickness and purpose of the final concrete product. Relatively thin buildings sections can require small coarse aggregates, though aggregates up to six inches (150 mm) in diameter have been used in large dams. A continuous gradation of particle sizes is desirable for efficient use of the paste. In addition, aggregates should be clean and free from any matter that might affect the quality of the concrete.

Almost any natural water that is drinkable and has no pronounced taste or odor may be used as mixing water for concrete. However, some waters that are not fit for drinking may be suitable for concrete.

Excessive impurities in mixing water not only may affect time and concrete strength, but also may cause efflorescence, staining, corrosion of reinforcement, volume instability and reduced durability.

Specifications usually set limits on chlorides, sulfates, alkalis, and solids in mixing water unless tests indicate that the water will not negatively impact concrete properties.

 

 

 


 

NRMCA Home
News & Features  |  E-Store  |  Membership  |  Conferences & Industry Events
Education  |  Certifications  |  Operations  |  Research & Engineering  |  Codes & Standards
Advocacy  |  Promotion  |  Sustainability  |  Ready Mixed Concrete Business

 

About NRMCA  |  Privacy Statement

© National Ready Mixed Concrete Association

 

 

MEMBER LOG-IN


 

Free Contractor Help

 

CDP Driver Cert.

 

Concrete In Practice

 

Technology In Practice

 

Grassroots Center

 

Green-Star Program

 

InFocus Magazine

 

Online Buyer's Guide

 

P2P Initiative

 

Pervious Contractor Certification

 

Plant Certification

 

Production Statistics

 

Promotion Resources

 

Surveys and Benchmarking

 

 

For Architects,

Engineers & Developers

 

Concrete-Answers
Central Help Site

 

Concrete Parking

 

Concrete Streets

 

Pervious Pavement

 

Concrete Buildings

 

Green Concrete

 

Self-Consolidating
Concrete

 

Flowable Fill

 

Green Rooftops

 

Decorative Concrete